Residential Home Elevators
The Elvoron HR is a sophisticated hydraulic elevating system designed specifically for use in private residences. The system fits within a vertical elevator hoistway connecting the floors to be serviced. A small area outside the hoistway is required to accommodate the controller and pump unit. This area can be adjacent to the hoistway or in a remote location. The elevator stops level with the bottom floor thus a small pit is required. The recommended pit depth is 8" (200mm) although shallower pit depths are feasible. At the upper landing, an overhead clearance of 92" (2337mm) is required for our standard cab height of 84" (2134mm). For taller custom cab heights adjust your overhead accordingly.
The Elvoron HR Model home elevator is equipped with many standard features, setting it apart from the competition. Some of these features are listed below. For a complete list please contact Garaventa Lift or refer to the Elvoron Design and Planning Guide.
- Available in 3 standard car sizes as well as custom sizes up to 21 square feet
- Standard Car Sizes
- 36" x 48"
- 36" x 54"
- 36" x 60"
- Available in 6 landing door configurations, including multiple door configurations
- Accordion car gate with safety switch in choice of clear or wood panels
- Wide choice of car wall panel colors and materials
- Choice of three car and wall fixture colors
- 1:2 Cable Hydraulic Drive
- Quiet submersed pump and motor
- Two speed hydraulic valve for smooth start and stop
- Standard rated load of 750 lbs.
- Nominal travel speed of 40 feet per minute. Travel range of up to 50 feet.
- Make up to 6 stops or have a total of 6 landing doors
- Fully automatic push button operation
- Illuminated buttons and digital floor display
- Automatic car lighting upon passenger entry
- Recessed ceiling lighting using low-voltage halogen fixtures
- Full length handrail located below the car operating panel
- Emergency backup power system for lights, locks and door operators
- Emergency stop and alarm
- Floor specific emergency battery lowering system
- Emergency manual lowering system
- Slack/broken cable safety brake device
- Hoistway door interlocks
- Solid car gate with safety switch
- UL or CSA certified components
- Drive System
Custom elevator cars - In addition to the optional features and finishes listed here, Garaventa Lift can build completely customized cars, including use of exotic woods, glass, steel and other materials.
Basic cab panels can be upgraded to a variety of wood species that can be further enhanced with recessed and raised panel styling.
- Cars can be built virtually any size up to a maximum of 21 square feet
- Increase the cab height to 96" or select a custom height anywhere from 80"–96"
- A hands free emergency telephone can be integrated into the car operating panel or can be installed in a separate telephone cabinet. Installation of a telephone is highly recommended
- A power gate operator will automatically open and close the car accordion gate making elevator operation much easier for those in wheelchairs or using other assistive mobility devices
- Similarly, a power operator can be installed on the hoistway swing doors
- Additional handrails in the car add style and passenger security
- Customize the buttons on your car operating panel to letters denoting certain floors rather than using numbers
- Keyed operation can be used to restrict operation to adults or to control access to certain floors
- Capacity can be increased from 750 lbs to 1,000 lbs.
- Locate the drive system and controller in a more remote location should space adjacent to the hoistway not be available
